Battery Charger See Sunforce 60125 50 Amp Pro Series Charge Controller Details
Product Description
The Sunforce 50 Amp Pro Series Charge Controller is ideal for protection of your solar panels and batteries. The deep discharge protection function of this controller has acoustic warnings and a built-in low-voltage disconnect that help prevent your batteries from overcharging. This product has temperature compensation and reverse polarity protection. Its PWM (pulse width modulation) charging functions include boost, float and absorption charging for more efficient solar power systems. The LCD display shows charge states in a clear bar-graph format. This product handles up to 750 watts of solar power.
Amazon.com
The Sunforce 50 Amp Pro Series Charge Controller is ideal for protection of your solar panels and batteries. The deep discharge protection function of this controller has acoustic warnings and a built-in low-voltage disconnect that help prevent your batteries from overcharging. This product has temperature compensation and reverse polarity protection. Its PWM (pulse width modulation) charging functions include boost, float and absorption charging for more efficient solar power systems. The LCD display shows charge states in a clear bar-graph format. This product handles up to 750 watts of solar power.
Key Component of a Solar System Over 15 Watts
A charge controller is a very important feature of a solar system and must be used on all systems over 15 Watts. A charge controller protects your batteries from overcharge and discharge. Charge controllers are the maintenance free protection of your solar panel and batteries.
A charge controller monitors the battery’s state-of-charge to insure that when the battery needs change-current, it gets it, and also insures the battery isn’t overcharged. Connecting a solar panel to a battery without a regulator seriously risks damaging the battery and potentially causing a safety concern.
Charge controllers are rated based on the amount of amperage they can process from a solar array.
- Prevents overcharging of 12 Volt batteries
- PWM regulation with integrated temperature compensation for high performance; Boost/absorption/float pulse width modulation-regulation (series type)
- Choose between 5 load disconnect algorithms
- Built-in acoustic warnings and a low-voltage disconnect
- Full solid-state protection
More About Sunforce 60125 50 Amp Pro Series Charge Controller
Battery DemandsBatteries seem to be the single most crucial component within a car. Long after you've turned the engine off, batteries seem to be continually supplying numerous electrical components With all the power they need, such as; engine management systems, sat nav, alarm, clock, radio memory, and more. as a result of this demand, batteries can become drained in a matter of weeks if not maintained at the correct manner by either driving the vehicle long enough to replace lost charge or by the usage of a battery charger.
When planning to not use your vehicle for extended periods, checking and boosting each and every 30 - 60 days is just not enough to guarantee your battery won't self-discharge to a severe level. This 'under charging' results in 'sulphation' if the battery voltage is allowed to drop and remain below 12.4 volts. This sulphation is the hardening of the lead plates within the battery and it reduces the battery's ability to accept or hold a charge. This incredibly is where we would then recommend the usage of a charger to keep the charge in a battery.
Charging
There are a few diverse ways of charging to maintain a battery:
Charge having a regular battery charger. Downside of This is that typically these are not automatic and don't turn themselves off when full charge is reached. If left unattended a battery can turn out to be 'boiled dry' in one overcharging. The battery becomes very harmful because of highly explosive gasses produced from charging at a high rate and the casing becoming extremely warm introducing a fire risk.
Trickle charging. This is where the charging device provides the connected battery a low steady charge. Drawback of this approach is that these will only give out a constant low charge that's frequently not enough to keep a battery above the serious voltage of 12.4 volts. In essence they may possibly maintain a good battery but not recharge it if the voltage level becomes as well low.
Battery conditioners. At Windrush Car Storage we connect all vehicles to a battery conditioner. These appear to be totally automatic battery chargers, And also this monitor, charge and maintain the battery with out the risk of overcharging. These may be left switched on and connected for long periods of time (years) with out the risk of gassing or overheating. Simply the ultimate of both of the above.
Battery maintenance
just before connecting a charger It's advisable to be aware of a few fundamental points;
make sure battery fluid level is between the minimum and maximum marks, if the battery just isn't a sealed unit. Top up along with other distilled or de-ionised water (the acid at the battery does not need replacing given that It is not consumed).
Clean battery terminals and lead connectors using a wire brush, make sure the confident and negative leads make a great fit to each and every of these terminal posts and work with a dedicated battery terminal spray or petroleum jelly to prevent corrosion.
Note: just before disconnecting the battery, guarantee that you may have the relevant code to the radio if required. This may have to be entered to the radio to function on re-connection of these battery.
Sunforce 60125 50 Amp Pro Series Charge Controller Reviews
Sunforce 60125 50 Amp Pro Series Charge Controller:Battery Charger
No comments:
Post a Comment