Battery Charger See SOLAR BA327 20-2000 CCA Electronic Battery and System Tester with Printer Details
Product Description
The new Digital Battery and System Tester with Integrated Printer, offers a complete testing solution for 6 and 12 Volt batteries and 6, 12 and 24 Volt charging systems. Compatible with a wide variety of battery types, it features easy, intuitive operation with quick, accurate assessment of battery condition and starting and charging system performance.
Amazon.com
The BA327 Digital Battery and System Tester from SOLAR offers a complete testing solution for 6 and 12 Volt batteries and 12 and 24 Volt charging systems. Compatible with a wide variety of battery types, it features easy, intuitive operation with quick, accurate assessment of battery condition and starting and charging system performance.
Easy Use on Multiple Battery Types and Sizes
Testing is quick and easy and allows the operator to perform either a battery test, system test or both from the home screen. The tester walks through the test sequence, prompting for key pieces of information and guiding the operator from one step to the next. It will test 6 and 12 Volt batteries with an operating range of 40-2000 CCA and will provide an analysis of 12 and 24 Volt starting and charging systems. The BA327 is compatible with many different types of batteries, including Conventional, Maintenance Free, AGM, Gel Cell, and Marine Starting Deep Cycle batteries.
Integrated Printer Provides Easy Service Documentation
The BA327 comes equipped with a built-in printer to document clear and accurate readings in just seconds. The printer uses standard thermal paper that is readily available at any office supply store. In addition, the printing stage can be easily bypassed if a printout is not necessary. The tester features a counter to track the number of battery and system tests performed so shops can track tester usage.
Convenient and Safe
The tester assigns a unique code for each battery test performed for warranty or service documentation. It also incorporates a number of features that improve convenience during testing, including reverse polarity protection, extra-long cable leads reaching 10’ and a rugged case for safe, secure storage.
- Tests 6 and 12 volt batteries from 40-2000 CCA, operating range from 1.5-30V
- 6 and 12V battery testing, 6, 12 and 24V system testing
- Tests multiple battery types, including Conventional, AGM, Gel Cell, Spiral Wound and Deep Cycle Batteries (with a Starting Rating)
- Built-in printer for service documentation, Printer uses standard thermal paper
- 10' cable leads, internal counter to track number of tests performed, unique warranty tracking code for each test performed
More About SOLAR BA327 20-2000 CCA Electronic Battery and System Tester with Printer
One of the fastest increasing segments in the electric power sector is Electric Vehicles that require a battery charger. The success of those Toyota Prius and companies including Tesla motors and greater Place, have laid the foundation for any future filled with electric cars. and the cars of tomorrow have special needs Every time talking about power and recharging.There seem to be two significant types of Battery chargers for vehicles:
Recharge a fuel vehicle's starter battery, where a modular charger is used.
Recharge an electric vehicle (EV) battery pack.
Electric vehicles contain a battery pack, so generally, they use series chargers. A 10 Ampere-hour battery can frequently take 15 hours to get to a totally charged state from a totally discharged condition with a 1 Ampere charger because it would require roughly 1.5 times the battery's capacity.
Power Factor Correction (PFC) chargers can more closely approach the maximum current the plug can deliver, shortening charging time.
On board EV chargers (change AC power to DC power to recharge the EV's pack) appear to be of two types: Isolated and non-isolated. The former make no physical connection between the A/C electrical mains as well as the batteries being charged. These typically hire some kind of Inductive charging. Some isolated chargers might be used in parallel. This allows for an increased charge current and reduced charging times. The latter has a direct electrical connection the A/C outlet's wiring. Non-isolated chargers cannot be using in parallel.
Public EV charging heads (aka: stations) provide 6kW (host power of 208 to 240 VAC off a 40 amp circuit). Rapid charging outcomes in even faster recharge times and is only limited by on the market AC power as well as the type of charging system.
Project much better Place has taken the lead in the field of a vehicular battery charger and is deploying a network of charging stations, in addition to subsidizing vehicle battery expenses through leases and credits.
SOLAR BA327 20-2000 CCA Electronic Battery and System Tester with Printer Reviews
SOLAR BA327 20-2000 CCA Electronic Battery and System Tester with Printer:Battery Charger
No comments:
Post a Comment